Samsung Galaxy S7 Stock Firmware Download

Update: Samsung Galaxy S7 and S7 Edge and all of its variants are being updated to official Android 8.0 Oreo. This post has been updated to help you download and install the latest Android 8.0 Oreo or 7.0 Nougat full stock firmware via Odin flashtool onto S7 SM-G930F/FD, S7 Edge SM-G935F/FD and more.

Downloads Galaxy S7 (Edge) full stock Odin firmware files. Before you proceed to the download section, you can either download the firmware directly from Samsung with a new tool without any speed restrictions or subscription from the first link or get it from third party websites from link 2. How To Flash Stock ROM Firmware On Samsung Galaxy S7 Active SM-G891A Step 1: To get started, download Samsung Galaxy S7 Active SM-G891A USB driver and install it in your computer. Once done, download the stock firmware of your device and extract the zip file to get the “.tar.md5 ” file as shown below.

Samsung Galaxy S7 and the S7 Edge are one of the most popular Android smartphones due to its stunning hardware and software specifications like the latest Samsung Experience 9.0, formerly known as TouchWiz. Now, the official Android 8.0 Oreo is rolling out to all variants of galaxy S7 adn the stock firmware files are also available for download.

This guide will also help you update, restore to stock Oreo firmware, or even Unbrick your Samsung Galaxy S7 device. If you have rooted the system, then you can easily restore any or all the changes you have made to the system and also revert it back to stock or factory images. The Odin flash tool method is the most common practice to update Samsung Android phones.

Downloads Galaxy S7 (Edge) full stock Odin firmware files

Before you proceed to the download section, you can either download the firmware directly from Samsung with a new tool without any speed restrictions or subscription from the first link or get it from third party websites from link 2.

Download Galaxy S7 full Stock Firmware directly from Samsung Servers!

Samsung Galaxy S7 (Edge) Stock Android 8.0 Oreo and 7.0 Nougat
- Galaxy S7 and S7 Edge Oreo Global variants → Download Oreo
- Sprint Galaxy S7 and S7 Edge Oreo → Download USA
- Verizon Galaxy S7 and S7 Edge Oreo → Download USA
- AT&T Galaxy S7 and S7 Edge Oreo → Download USA
- T-Mobile Galaxy S7 (Edge) SM-G930T → Download coming soon…
Galaxy S7 (Edge) Korean and Canadian variants
Download via Samsung tool
- Galaxy S7 and S7 Edge Canadian variant
- Samsung Galaxy S7 SM-G930S
- Samsung Galaxy S7 SM-G930K
- Samsung Galaxy S7 SM-G930L
- Samsung Galaxy S7 Edge SM-G935S
  Samsung Galaxy S7 Edge SM-G935K
  Samsung Galaxy S7 Edge SM-G935L
Tools Required to Restore Galaxy S7 to Stock
- Odin Software → Latest Odin | Mirror

Warning: Although going through this procedure should not cause harm or any damage to your device, it remains an unofficial process and you should be cautious about it. Reader’s discretion is advised. Also, This will perform a clean full firmware installation. That means you will lose all your data, app, media etc. Hence, it’s better to backup before you proceed.

How to Restore to Stock Samsung Galaxy S7 and S7 Edge Full Firmware

Prerequisites:

Enable USB Debugging on your device. To do so, go to Settings>About Phone> Tap on the Build Number several times until you get a new Developer Options in the Settings. Open Developer Options and enable USB Debugging from there. Trust the connection by allowing it when you connect it to your PC for the first time.
Make sure you have latest device drivers setup on your PC for a better connection. Get it from the download section official from the manufacturer.
Backup everything before you proceed. Odin performs a clean install, that you will lose apps, data, media, etc.

Installation Instructions:

Step 1: Download the listed firmwarefor your for your Galaxy device. Extract the zip file to get the firmware with .tar or .tar.md5 extension and place at a location where you can easily locate it in your PC.

Step 2: Now boot your device into Download/Odin Mode. To do so, turn off your device completely and then press and hold Power button + Volume Down + Home keys for a few seconds. If you see a warning sign press Volume up/ Volume down to get the Odin screen.

Step 3: If you already have Odin software on your PC then simply run the Odin3_3.10.7.exe file. If not, then download the Odin3.zip file from the download section and extract it. Run Odin software as administrator.

Step 4: While your device is still in the Odin Mode, connect your device to your PC using a USB cable.

Step 5: After a successful connection, the ID: COM in the Odin should turn Blue and an Added!! message should be displayed in the Log tab. In case your device doesn’t show up in Odin, then you can troubleshoot it with the steps given at the end of the tutorial.

Step 6: Now click on AP button and add the firmware file by navigating to the file path.

Step 7: Take care that only Auto Reboot and F.Reset Time are selected in the Options tab. Do not check Re-Partition.

Step 8: Once done, verify everything and proceed with installation by selecting Start button. If it’s a 4 file firmware, then take a look at the following image:

Step 9: When you get a PASS! message in the Log tab on your Odin software, that means firmware has successfully been installed and the device will restart itself. If not then reboot manually.

When you see the boot animation, you can enjoy your new firmware. Be patient as first boot may take a while. However, if the system doesn’t boot up for a long time, then go through the following.

How to Fix Bootloop on Samsung Galaxy Device?

If you come across boot loop or your Samsung Galaxy device is stuck at the boot logo then factory reset your device from the recovery. To do so, turn off your device (also remove the battery if applicable and put it back again) and reboot into recovery mode by press and holding Power + Volume down + Home keys for a few seconds. From the Recovery, select Wipe Data / Factory Reset. Confirm the action and reboot once done. Your device should now boot up.

How to Troubleshoot Connectivity problem on Samsung Galaxy Device?

If your device doesn’t show up in the Odin software, then turn off USB Debugging and turn it on again and Reboot. You can also reinstall the Samsung USB Drivers or try changing the USB cable and connection ports from device manager.

Download Samsung Galaxy S7 and S7 Edge Android Oreo full stock full firmware for SM-G930F, G930T, G930W8, SM-G930FD, SM-G935F, SM-G935W8, SM-G935T, and more. Also, see how to install Android 8.0 Oreo on Samsung S7 and S7 Edge.

Install Stock Firmware/ROM For Samsung Galaxy S7 (Back to stock, Unbrick, Unroot and Fix Bootloop)

Contents

0.2 What Is Stock ROM and What are its benefits?

1 PRE-REQUIREMENTS

There are loads of benefits of having the stock ROM of an android device.You can Fix Bootloop and Black screen issue by flashing back the stock firmware.If you are facing some software related issues, then you can flash the stock ROM to fix that.You can Unbrick and unroot your device by flashing back the stock firmware which will give you your device’s warranty back.

What Is Stock ROM and What are its benefits?

Stock ROM’s are the ones that come pre-installed with phones or tablets. These are the versions of Android developed by the OEM’s for making their phones look unique. They also come with pre-installed with certain apps.

The reason for the usage of Custom ROM’s over Stock ROM’s are:

1) Security: These ROM’s are developed by big companies and hence there are fewer chances of malware/ virus affecting the phone.

2) Warranty: Installing a Custom ROM needs root access and this voids warranty of your smartphone in most cases. A lot of OEM’s do not allow the root access or customization.

3) Pre-installed apps and features: A lot of these ROM’s come with pre-installed apps which are sometimes useful. These apps vary between different manufacturers and even for models. Some OEM’s also give their customers premium features like Launchers, wallpapers, home screen, etc.

The Advantages Of Samsung Galaxy S7’s Stock Firmware

Flash Stock To Unbrick your Samsung Galaxy S7.
Flash Stock ROM to Fix the bootloop problem.
Upgrade and Downgrade Samsung Galaxy S7.
Unroot or Fix Bugs on your phone.
To fix the lag or stutter on Samsung Galaxy S7.
Revert back to stock to gain your warranty.

UpdateDownload LineageOS 15.0 For Galaxy S7/S7 Edge | Android 8.0 OreoAND Best Samsung Galaxy S7 and S7 Edge Android Nougat ROMs List (Android 7.1.1)

Stock Firmware Samsung Galaxy S7 Downloads

(Download & Install Odin on your PC first)

For Samsung Galaxy S7 Edge SM-G935F Stock Firmware Check our previous post >Download & Install Stock Firmware On Samsung Galaxy S7 Edge SM-G935F

Att Galaxy S7 Edge Stock Firmware Odin

Other Galaxy S7 Guides

Supported Model: Galaxy S7 (All Models)

PRE-REQUIREMENTS

1. BACKUP YOUR ANDROID DATA

This is the first thing you should do

How To Create & Restore Nandroid Backup On Android Devices (If you have TWRP recovery / rooted users)

2.INSTALL SAMSUNG GALAXY DRIVERS

Download & Install Samsung USB drivers On your PC (Important)

3.SETUP ADB & FASTBOOT DRIVERS ON PC

4.ENABLE USB DEBUGGING MODE

Make sure that your phone has more than 60% charge.

How To Flash / Install Stock Firmware On Samsung Galaxy S7 (All Models)

Samsung Galaxy S7 Stock Firmware Free Download

(SM-G930F /SM-G930A/SM-G930P/SM-G930R4/SM-G930T/SM-G930V/SM-G930W8/SM-G930U/SM-G930F/SM-G930K/L/S)

Step By Step Guide

First Download Samsung Galaxy S7 Stock Marshmallow 6.0.1 Firmware from the download section
Then follow this guide to flash this Stock Firmware On Samsung Galaxy S7

Done!!!

Download Samsung Galaxy S7 Stock Marshmallow 6.0.1 Firmware

If you have any question related to this post, feel free to leave that in the comment section below.

Verizon Galaxy S7 Stock Firmware

Via Sammobile

Luckysac0